0102030405
Cold Application Optical Fiber Filling Gel from China Suppliers – High Performance Waterproofing Solution for Factories
Product Introduction
Optical fiber filling gel adopts high viscosity GTL process oil, high molecular synthetic material and organic thickener as main base materials. They are combined to be non-silicon optical fiber filling gel by advanced production technique whose features are low density, excellent temperature performance, high thixotropic index, wide application, tiny acid value and hydrogen evolution value. Type AC-E008 also has steadily temperature performance between -45°C to 80°C. According to various requirements of clients, the technical index of viscosity, penetration, thixotropic and etc. could be adjusted in order to satisfy requirements of filling technique.
Technical Parameters
Cold Application Optical Fiber Filling Gel Technical Specification
1. General Technical Requirements: Filling gel is needed to be homogeneous, hydrogen absorption, and does not include any dust, metal particles, and other impurities. It should be no sight visible air bubbles, and the mold should be no nutrition. Filling gel should be non-toxic, no stimulation to the skin.
2. Main Technical Parameters:
| Serial No. | Items | Unit | Index |
|---|---|---|---|
| 1 | Appearance | - | Homogeneous, no impurities |
| 2 | Dropping point | °C | ≥200 |
| 3 | Density (20°C) | g/cm³ | ≤0.88 |
| 4 | Cone penetration (25°C - 40°C) | 1/10mm 1/10mm |
≥400 ≥230 |
| 5 | Color stability (130°C, 120h) | - | ≤2.5 |
| 6 | Oxidation induction time (190°C) | min | ≥30 |
| 7 | Flashing point | °C | ≥220 |
| 8 | Hydrogen evolution (80°C, 24h) | μl/g | ≤0.03 |
| 9 | Oil perspiring (80°C, 24h) | % | ≤0.5 |
| 10 | Evaporation capacity (80°C, 24h) | % | ≤0.5 |
| 11 | Water resistance (20°C, 7d) | - | Non-disassembly |
| 12 | Acid value | mgKOH/g | ≤0.3 |
| 13 | Water content | % | ≤0.01 |
| 14 | Viscosity (25°C, D=6S⁻¹) | mpa.s | 22000 ± 6600 |
| 15 |
Compatibility: A. With optical fiber, optical fiber coating materials (85°C, 30×24h) B. With pine casing material (85°C, 30×24h) - Variation in tensile strength - Elongation at break - Mass variation C. Composite metal band (68°C, 7×24h) - Steel-plastic composite tape - Aluminum plastic compound tape |
- % % % - - |
No color fading, No migration, no delamination, no cracking. Maximum release force 1.0N ~ 8.9N. Average value 1.0N ~ 5.0N. ≤25 ≤30 ≤3 No delamination, no cracking No delamination, no cracking |
| 16 | Corrosive (80°C, 14×24h) with copper, aluminum, steel | - | No corrosion points |
3. Environmental Performance Requirements
| Type | Matter | Prohibitive Content (mg/kg) |
|---|---|---|
| Heavy Metal | Plumbic | ≤1000 |
| Cadmium | ≤100 | |
| Mercury | ≤1000 | |
| Hexavalent Chromium | ≤1000 | |
| Organic Bromide | Polybrominated Biphenyls (PBB) | ≤1000 |
| Polybrominated Diphenyl Ethers (PBDE) | ≤1000 |
Frequently Asked Questions (FAQ)
What is the main composition of the optical fiber filling gel?
The optical fiber filling gel primarily adopts high viscosity GTL process oil, high molecular synthetic material, and an organic thickener as its main base materials.
What are the key features of this filling gel?
The gel is a non-silicon product characterized by its low density, excellent temperature performance, high thixotropic index, wide application range, and exceptionally low acid and hydrogen evolution values.
What is the optimal temperature performance range for Type AC-E008?
Type AC-E008 offers steady temperature performance in extreme environments, ranging from -45°C to 80°C.
Is the filling gel safe to handle and environmentally friendly?
Yes, it is completely non-toxic and causes no stimulation to the skin. Additionally, it complies with strict environmental performance requirements, limiting heavy metals (like Plumbic, Cadmium, and Mercury) and organic bromides.
Does the gel contain any visible impurities or air bubbles?
No, the general technical requirements ensure that the filling gel is entirely homogeneous. It does not include any dust, metal particles, impurities, or visible air bubbles.
Can the technical parameters of the gel be customized?
Yes, according to various client requirements, technical indices such as viscosity, penetration, and thixotropy can be adjusted to perfectly satisfy specific filling technique requirements.